Sale!

Trailer Axle Hub Kit 3500 LB-for EZ Lube Spindle-5 on 4.5 Bolt Pattern- includes Bearings-Seal-Cap-10 Nuts

Trailer Axle Hub Kit 3500 LB-for EZ Lube Spindle-5 on 4.5 Bolt Pattern- includes Bearings-Seal-Cap-10 Nuts - Image 2

Trailer Axle Hub Kit 3500 LB-for EZ Lube Spindle-5 on 4.5 Bolt Pattern- includes Bearings-Seal-Cap-10 Nuts

Name: Trailer Axle Hub Kit 3500 LB-for EZ Lube Spindle-5 on 4.5 Bolt Pattern- includes Bearings-Seal-Cap-10 Nuts
SKU: 19001
Price: 66.91 USD
Availability: InStock

Original price was: $71.95.Current price is: $66.91.

SKU: 19001

Captcha *

Refresh Captcha

SKU: 19001 Category: Misc Trailer Accessories

Description
Additional information

Trailer axle replacement hub kit for 3500 LB EZ lube spindle, 5 on 4.5 bolt pattern
Hub kit to include:
2- bearings, will need to be installed into hub
Races are pressed in
1- EZ lube cap
1- EZ lube rubber plug
1- seal ( to be installed)
10- 1/2″ tapered nuts
Q: How do I figure out what bearings to order for my trailer?A: The hub will have to be removed and bearings removed for physical identification. Bearings will have specific numbers etched into the side of the bearing center. These numbers are universal; all tapered roller bearing manufacturers use the same numbering system for bearing and race components. We will need to know the inner and outer bearing numbers in the hub. We’ll also need to know the number of wheel studs in the hub and a couple other measurements. Having the hub and a ruler handy when you call will greatly help speed up the process of finding the right hub for your needs.
Q: Why do the trailer hub dust caps come off while driving?A: Typical trailer hub dust caps are formed of light gauge steel, and over-repeated installations become “loose” as the portion of the dust cap lip that fits into the hub is compressed, slightly reducing its overall diameter. In addition, the hub opening itself may wear, making the fit looser still. Consider the following tips when reinstalling dust caps on your trailer hubs: Ensure that the hub bore where the cap fits is completely free of grease/oils, increasing the friction/grip of the hub. Likewise to the dust cap, ensure that the part of the cap fitting into the hub is also clean of grease/oils. Application of a light film of gasket sealer (aka Permatex, etc.) to the lip of the dust cap before installation will serve as a “glue” to assist in bonding the cap to the hub until next time you WANT the dust cap to come off. Another installation tip is to turn the dust cap on its side and lightly “tap” the side with a hammer to slightly “oval” the dust cap, ensuring that the dust cap lip and hub bore come in firm contact with each other upon cap installation. If the above suggestions do not work for you, replace dust caps with new ones for a tighter, like-new fit.

Weight	160 oz
Dimensions	9 × 9 × 9 in

Gruz KO LLC

2 years ago

Ala Maynard

Great product arrived as described. Super fast delivery to Maui! Mahalo!

Sarah Holder

Great price & shipping. No hassle

Randal Zimmerman

Dog box parts had exactly the replacement door handle I needed. I called their customer service number and they answered immediately and confirmed I had the right part. They shipped it right away and I couldn't be happier with their service.

Luke

Had issues with shipping on my end. Douge took care of the problem at no charge and reshipped items.

Glenn DiOrio

After finding the "right stuff" from Dog Box Parts, for my trailer fenders, I went about getting it cut and ready to apply. The width was perfect and I have enough on the roll to do this many times again! After getting it cut, I prepped the fenders with a scuff pad and cleaned with brakleen. Then I applied a spray of water/soap mixture I use for decals. This allows you to move it a bit or lift and reposition. I then used my roller (made for art work) and smoothed out the tape and removing air bubbles and pulling the paper backing as i went. Great finished product!

Barry Wolford

Great product, reasonable price, and fast shipping! DB parts is the only place online (that I could find) selling a tamper proof (i.e. 3rd bolt under the flange) trailer door cam bar latch with offset hinge (to allow the bar to overlap the door). Other products online have flat hinges and need to be shimmed to work properly in most cases. Ordered the 36" version. Shipped next day and arrived sooner than expected.

Trailer Axle Hub Kit 3500 LB-for EZ Lube Spindle-5 on 4.5 Bolt Pattern- includes Bearings-Seal-Cap-10 Nuts

Related products

Login