Home/Trailer Hardware
Camtainer Barrel Nut Flanged Large 5/16″ Utility Cargo Trailer Inside Door 4 Pcs
$3.00
4- Barrel/Camtainer Nuts Flanged (used on Trailer Door & Hasp) NEW
Flanged barrel nut 5/16″ – 18 x .625″L (coarse thread) Zinc plated steel
T45 torx bit required to tighten or 7/32″ allen wrench
Head diameter 1″ (1.000″)
Barrel length from inside of flange 5/8″ (.625″) long
| Weight | 4 oz |
|---|---|
| Dimensions | 4 x 6 x 1 in |
Be the first to review “Camtainer Barrel Nut Flanged Large 5/16″ Utility Cargo Trailer Inside Door 4 Pcs”
Related Products
-
Trailer Ramp Door Bar Lock Latch Enclosed Cargo Zinc 401Z
$28.50To Include the following:
Designed to mount on flush doors, vertical application. Keepers placed on stationary part of trailer. Handle welded to pipe with lugs welded into pipe ends. Handle portion and U clamps used to secure pipe placed on fold down or swing away door. Hasp placed in a position directly under handle to secure with padlock.
This model can be built to any length required.Rubber coated handle (requires welding to 1″ Sch40 pipe) handle size 1.25″w x 13.75″L
One Piece zinc plated hasp, swivel, accepts locking device 1″w x 5.5″L, 4.25″ BC (bolt center)
Zinc plated Top and Bottom Keeper- 1.375″w x 5″L, 4″ BC
Zinc plated top and bottom lugs(require welding to pipe) 2.5″L (1″ of which slides to interior of pipe)
3 ea. zinc plated steel top pipe retainer (1.5″w x 4″L) 2.875″ BC
3 ea zinc plated pipe retainer (mounted behind pipe to act as bearing) (dimensions as above)
1″ Schedule 40 pipe required, requires cut to length (not included)
Mounting hardware not included -
Aluminum Bar Door Lock/ Latch Assembly
$33.50Aluminum Bar Lock Kit Assembly for Enclosed Utility Cargo Trailers, Truck bodies, Vans
To Include the following:
- Designed to mount on flush doors
- Rubber coated aluminum handle (requires welding to 3/4″ Sch40 pipe)
- 2 Piece Stainless Steel Hasp, swivel, accepts locking device, hole size
- Aluminum Die Cast Top and Bottom Keeper
- Aluminum die cast top and bottom lugs
- 3 ea. #304 stainless steel top pipe retainer
- 3 ea plastic bottom pipe retainer (mounted behind pipe to act as bearing)
- 3/4″ Sch40 aluminum pipe required, requires cut to length (not included)
- Mounting hardware not include
Reviews
There are no reviews yet.