• Door Safety Tab SS

    $18.00

    Stainless Steel safety tab. Pair sold as set. Flat plate mounts to door frame. Slot is required into door to to allow plate to pass through. Angle clip is pop riveted to face of door and attach cable with clip. (sold separately) Aluminum Rivets included.

    Flat Plate and angle bracket measure 1″ w.

  • Door Safety Tab SS

    $18.00

    Stainless Steel safety tab. Pair sold as set. Flat plate mounts to door frame. Slot is required into door to to allow plate to pass through. Angle clip is pop riveted to face of door and attach cable with clip. (sold separately) Aluminum Rivets included.

    Flat Plate and angle bracket measure 1″ w.

  • Door Safety Tab SS

    $13.00

    Stainless Steel safety tab. Pair sold as set. Flat plate mounts to door frame. Slot is required into door to to allow plate to pass through. Angle clip is pop riveted to face of door and attach cable with clip. (sold separately) Aluminum Rivets included.

    Flat Plate and angle bracket measure 1″ w.

  • Door Safety Tab SS with Safety Clip and cable

    $22.00

    Stainless Steel safety tab. Pair sold as set. Flat plate mounts to door frame. Slot is required into door to to allow plate to pass through. Angle clip is pop riveted to face of door and attach cable with clip. (sold separately) Aluminum Rivets included.

    Flat Plate and angle bracket measure 1″ w.

  • Folding T Handle SS 600

    $20.00

    Stainless Folding “T” handle 3.5/8″ x 4 5/8″” overall flange measurement. Cutout required 2.5/8″ x 3 5/8″. Total overall depth face to back side 2.5″ * Pan is Stainless steel high polish finish * Chrome finish “T” * Powder coated cam * Dust shutter cam lock * Max wall/ door jam thickness @ 1 7/8″” * Min wall/ door jam thickness @ 1 1/8″ or can be less provided a spacer is built in to make up min. * Total cam travel .75″ * Designed to mount on flat door surface * 4 blind mount studs @ 10-24 diameter 3″ x 3 3/16″ BC,(2) #SCL03 key’s any qty keyed alike

  • Gas Spring 20″ x 11.4″ x 8.6″ stroke 60#

    $18.00
    20″ extended length x 11″ compressed length, 8.6″ stroke 60# force. Application to use on holding open kennel doors and closet door, storage.
  • Handle Adjustable Cam Latch C15

    $5.00

    Cam to be used on “T” or “L” handles. Accepts a 5/16″ square shaft. Aluminum material.
    Overall length 2.0″ ,1.625″ center of sq hole to tip x .375″ thick
    Set screw with allen head for securing

  • Hengs Zephyr 3 Speed Out 2 IN RV Roof Fan 12V 1200 CFM Forward Reverse White Lid

    $150.00

    Product features:
    Manual Opening Lid
    Forward/Reverse air flow
    Provides 1200 CFM at max fan speed
    Low 1.6 amp draw
    Fan runs with lid closed to circulate air
    Turn dial to select fan speeds
    Powerful 3 speed air flow out, 2 speed air flow in
    Twin lifting arms
    Installs in all standard 14″x14″ RV roof opening
    Translucent white lid
    Includes trim extension up to 4″ roof thickness

    Product Description:
    Heng’s Zephyr Model. Fan runs with lid closed to circulate air (Ceiling Fan Mode). 3 controls fan speeds air out, 2 fan speeds air in. Provides over 1200 cubic feet of air per minute at max setting to keep you cool and comfortable. Installs into all standard 14 inch x 14 inch RV roof openings. 1-year limited warranty. White lid, manual opening.


  • High Profile Popup Vent Trim Ring Plastic

    $6.00

    Add this trim ring to the bottom side of your popup vent cutout. Cover the cut edge and protect and seals insulation in roof. 2.25″ max roof thickness. Made of black composite material. 8.75″w x 13.25″L overall size. Fastening thru plastic flange required. NOTE.. trim ring will only fit EOVAHP High profile popup…Popup not included.

  • Maxxair 12 Volt 14″x14″ Fan 4 Speed

    $130.00
    • Quiet, 12 volt DC 4 Speed motor –
    • ASA White Lid / 1 year warranty
    • Removable screen for easy cleaning
    • Low AMP draw insures full-time use
    • Flanged for easy installation
    • Extension trim 4″height
    • Manual crank up lid
    • Exhaust only
  • Mechanical Door Prop 12.5″

    $19.95

    “Finish: Bright Zinc
    Construction: 16 Gauge Steel
    Latches automatically when extended and releases by slightly lifting door
    Special nylon washer at each flange’s pivot point for smooth operation
    (2) 11/32″” mounting holes on each flange
    Safety pin holes provided in latched position, to prevent accidental unlatching
    Great for use on storage containers, utility boxes and lids
    Other size door props and different configurations of flanges are available upon request”

  • Paddle Latch SS Large 9015

    $18.00

    Stainless Steel Paddle 3.75w x 4.75″ L overall size. 4 mounting holes. Cutout required 2.75″ x 3.75″L x 7/8″w bolt zinc plated Keyed alike with #502 key. Striker plate offered as optional.