This is a sample content to be replaced with a small description of the category of the product displayed.

  • Aluminum Bar Door Lock/ Latch Assembly

    $30.00

    Aluminum Bar Lock Kit Assembly for Enclosed Utility Cargo Trailers, Truck bodies, Vans
    To Include the following:

    • Designed to mount on flush doors
    • Rubber coated aluminum handle (requires welding to 3/4″ Sch40 pipe)
    • 2 Piece Stainless Steel Hasp, swivel, accepts locking device, hole size
    • Aluminum Die Cast Top and Bottom Keeper
    • Aluminum die cast top and bottom lugs
    • 3 ea. #304 stainless steel top pipe retainer
    • 3 ea plastic bottom pipe retainer (mounted behind pipe to act as bearing)
    • 3/4″ Sch40 aluminum pipe required, requires cut to length (not included)
    • Mounting hardware not include
  • Center Case Latch 5611 OL

    $27.00

    Center case latch designed to operate with L204R or BP225 “L” handles. Specific for two point latch on dog doors or storage boxes.  Extended tang designed to strike behind door frame to pull door tight at center.

    Included are the following:
    2- 34″ Rods and hold down clips. Rods will require cut to length to fit your application. Mounting designed to place center case on backside of door, either mounted directly to door plate or raised away from backside with spacer. Clips placed at rod ends to secure door by striking behind door frame or drilling holes into frame.
    Center Case alone measures 2″w x 4.25″L with a 5/16″ sq hole to accept “L” or “T” handle shaft.  OL center case applies to ,as you are facing door, hinge on left edge. Image showing a backside of a kennel door is a application installed.

  • Center Case Latch 5611 OR

    $27.00

    Center case latch designed to operate with L204R or BP225 “L” handles. Specific for two point latch on dog doors or storage boxes.  Extended tang designed to strike behind door frame to pull door tight at center.

    Included are the following:
    2- 34″ Rods and hold down clips. Mounting designed to place center case on backside of door, either mounted directly to door plate or raised away from backside with spacer. Clips placed at rod ends to secure door by striking behind door frame or drilling holes into frame.
    Center Case alone measures 2″w x 4.25″L with a 5/16″ sq hole to accept “L” or “T” handle shaft.  OR center case applies to ,as you are facing door, hinge on right edge. Image showing a backside of a kennel door is a application installed.

  • Chrome Draw Latch for Storage Lids

    $10.00

    Chrome draw latch for storage box lids. Spring loaded with keeper

  • Folding T Handle SS 600

    $20.00

    Stainless Folding “T” handle 3.5/8″ x 4 5/8″” overall flange measurement. Cutout required 2.5/8″ x 3 5/8″. Total overall depth face to back side 2.5″ * Pan is Stainless steel high polish finish * Chrome finish “T” * Powder coated cam * Dust shutter cam lock * Max wall/ door jam thickness @ 1 7/8″” * Min wall/ door jam thickness @ 1 1/8″ or can be less provided a spacer is built in to make up min. * Total cam travel .75″ * Designed to mount on flat door surface * 4 blind mount studs @ 10-24 diameter 3″ x 3 3/16″ BC,(2) #SCL03 key’s any qty keyed alike

  • Paddle Latch SS Large 9015

    $18.00

    Stainless Steel Paddle 3.75w x 4.75″ L overall size. 4 mounting holes. Cutout required 2.75″ x 3.75″L x 7/8″w bolt zinc plated Keyed alike with #502 key. Striker plate offered as optional.

  • Pin for Tool Box Paddle Latch RL250

    $1.70

    Striker pin for paddle latches that fitted with a “J” hook as a catch.  5/16″ threaded stud,  straight portion at 5/16″ dia x .75″L

  • Single Point Latch 46ZN

    $4.00

    Single point latch designed to operate with “L” and “T” handles. Specific for two point latch on dog doors or storage boxes.Extended tang to strike behind door frame.

    Mounting designed to place in center of door, either mounted directly to door plate or raised away from backside with sq tubing. single point measures 1″w x 3″L with a 5/16″ sq hole to accept “L” or “T” handle shaft.

  • Stainless Steel Folding T Door Latch Dust Cover Adjustable Cam FT2500

    $18.00
    4.76″w X  4.875h” overall flange dimension
    3 3/4″ x 2 3/8″ cutout required
    Dust cover
    Stainless material with zinc cam
    Cam has adjustable travel +/- 1.25″
    Total overall depth 2.75″
    Designed to mount on flat door surface
    4 blind mount studs 1/4″ x .50 long
    Mounting stud centers 3.863″ x 3.312″
    Any qty all keyed alike # 503 key
  • Storage Draw Latch

    $22.00

    Draw latch that is key lockable. Zinc plated material. Works great on storage boxes and top storage lids. Keyed alike with keeper. Heavy duty construction.

  • Striker Pin for Tool Box Paddle Latch

    $1.70

    Striker pin for paddle latches that fitted with a “J” hook as a catch.  5/16″ threaded stud,  straight portion at 5/16″ dia x .75″L…