This is a sample content to be replaced with a small description of the category of the product displayed.

  • 7″ Aluminum spinner vent

    $8.00

    Aluminum Spinner vent. Four thru holes x 3/16″ diameter for fastening. 7 11/16″” overall diameter. Cut-out opening size of 5.75″ diameter.

  • Aluminum Panel Vent 10.5 x 12.25″

    $9.00

    12.25 x 10.5″ Alum Vent panel vent. Simple and basic added air flow. Non closing

  • Aluminum Popup Air Flow Vent Lo Profile Egro Handle

    $23.00
    • Low profile aluminum popup, bi directional
    • Overall size 12″L x 6.625″w x .75″ closed
    •  3.5″H top of flange to highest point of lid when open
    • 4″ x 10.5″ hole cutout required
    • Distance from bottom of flange to bottom of handle at 4.5″ , cover closed
    • 2″ deep  from bottom of flange to lowest point with cover open
    • 1″ flange allows for easy mounting
    • Flange has 10 –  3/16″ mounting holes for easy application (screws not included)
    • Top gasketed lid securely clamps tight to prevent water entry
  • Aluminum Popup Air Flow Vent Lo Profile Egro Handle Gasket & Trim

    $28.00
    • Low profile aluminum popup, bi directional
    • Overall size 12″L x 6.625″w x .75″ closed
    •  3.5″H top of flange to highest point of lid when open
    • 4″ x 10.5″ hole cutout required
    • Distance from bottom of flange to bottom of handle at 4.5″ , cover closed
    • 2″ deep  from bottom of flange to lowest point with cover open
    • 1″ flange allows for easy mounting
    • Flange has 10 –  3/16″ mounting holes for easy application (screws not included)
    • Top gasketed lid securely clamps tight to prevent water entry
    • Trim ring with flange , ceiling depth up to 1.75″
  • Aluminum Popup Vent Hi Profile

    $23.00
    • Aluminum Pop-up vent overall size 13.375 L x 7.75 w x 2.25 h (cover down)
    • Deep extending into box area with cover down at 1.5″, flange to bottom of handle
    • Total height from flange to cover edge in open position at 4.75″
    • Bi-directional, forward or reverse top opening.
    • Mounting flange has a perimeter of holes for fastening, (12) 3/16″ diameter
    • Top lid securely clamps down to prevent water entry, gasket-ed  lid
    • Cutout opening 5 5/8″ x 11 1/4″, inside corners require a 2.25″ radius.
  • Aluminum Popup Vent Hi Profile w/ Trim Ring

    $26.50
    • Aluminum Pop-up vent overall size 13.375 L x 7.75 w x 2.25 h (cover down)
    • Deep extending into box area with cover down at 1.5″, flange to bottom of handle
    • Total height from flange to cover edge in open position at 4.75″
    • Bi-directional, forward or reverse top opening.
    • Mounting flange has a perimeter of holes for fastening, (12) 3/16″ diameter
    • Top lid securely clamps down to prevent water entry, gasket-ed  lid
    • Cutout opening 5 5/8″ x 11 1/4″, inside corners require a 2.25″ radius
  • Aluminum Popup Vent Lo Profile

    $22.00
    • Low profile aluminum popup, bi directional
    • Overall size 12″L x 6.625″w x .75″ closed
    •  3.5″H top of flange to highest point of lid when open
    • 4″ x 10.5″ hole cutout required
    • Distance from bottom of flange to bottom of handle at 4.5″ , cover closed
    • 2″ deep  from bottom of flange to lowest point with cover open
    • 1″ flange allows for easy mounting
    • Flange has 10 –  3/16″ mounting holes for easy application (screws not included)
    • Top gasketed lid securely clamps tight to prevent water entry
  • Aluminum Popup Vent Lo Profile Black Powder Coated

    $23.00
    • Powder coated black on aluminum
    • Low profile aluminum popup, bi directional
    • Easy release handle, spring compressed to latch in place
    • Overall size 12″L x 6.625″w x .75″ closed
    • 3.75″ x 9.375″ air vent opening
    •  3″ top of flange to highest point of lid when open
    • 4″ x 10.5″ hole cutout required
    • Distance from bottom of flange to bottom of handle at 3″ , cover closed
    • 2.5″ deep  from bottom of flange to lowest point with cover open
    • 1″ flange allows for easy mounting
    • Flange has 10 –  3/16″ mounting holes for easy application (screws not included)
    • Top gasketed lid securely clamps tight to prevent water entry
  • Aluminum Popup Vent Lo Profile Black Powder Coated w/gasket

    $25.00
    • Powder coated black on aluminum
    • Low profile aluminum popup, bi directional
    • Easy release handle, spring compressed to latch in place
    • Overall size 12″L x 6.625″w x .75″ closed
    • 3.75″ x 9.375″ air vent opening
    •  3″ top of flange to highest point of lid when open
    • 4″ x 10.5″ hole cutout required
    • Distance from bottom of flange to bottom of handle at 3″ , cover closed
    • 2.5″ deep  from bottom of flange to lowest point with cover open
    • 1″ flange allows for easy mounting
    • Flange has 10 –  3/16″ mounting holes for easy application (screws not included)
    • Top gasketed lid securely clamps tight to prevent water entry
    • 1/8 neoprene gasket
  • Aluminum Popup Vent Lo Profile w/ Gasket

    $24.50
    • Low profile aluminum popup, bidirectional, with neoprene gasket
    • Overall size 12″L x 6.625″w x .75″ closed
    • 4″ x 10.5″ hole cutout required
    • Distance from bottom of flange to bottom of handle 4.5″ with cover closed
    • Distance from bottom of flange to lowest point 2″, with cover open
    • 3.5″H top of flange to highest point of lid when open
    • 1″ flange allows for easy mounting
    • Flange has 10 –  3/16″ mounting holes for easy application (screws not included)
    • Top lid securely clamps tight to prevent water entry
  • Aluminum Popup Vent Lo Profile w/ Gasket & trim 622062

    $24.50
    • Low profile aluminum popup, bidirectional, with neoprene gasket
    • Overall size 12″L x 6.625″w x .75″ closed
    • 4″ x 10.5″ hole cutout required
    • Distance from bottom of flange to bottom of handle 4.5″ with cover closed
    • Distance from bottom of flange to lowest point 2″, with cover open
    • 3.5″H top of flange to highest point of lid when open
    • 1″ flange allows for easy mounting
    • Flange has 10 –  3/16″ mounting holes for easy application (screws not included)
    • Top lid securely clamps tight to prevent water entry
  • High Profile Popup Vent Trim Ring Plastic

    $6.00

    Add this trim ring to the bottom side of your popup vent cutout. Cover the cut edge and protect and seals insulation in roof. 2.25″ max roof thickness. Made of black composite material. 8.75″w x 13.25″L overall size. Fastening thru plastic flange required. NOTE.. trim ring will only fit EOVAHP High profile popup…Popup not included.